- Construction use.
- Outdoor use in most conditions.
- Structural frame work.
- Roofing.
- Mechanical repair and installation.
- Any sort of heavy lifting where the ground gets rough.
- Working overhead in areas where the ground does not.
- Accommodate an elec. Unit.
- Dual fuel (gas / propane power) along with 4-wheel.
- Drive allows go anywhere capability.
- 2000lbs payload capacity ensures the heaviest jobs will get done.
- Outdoor use in most conditions.
- Structural frame work.
- Roofing.
- Mechanical repair and installation.
- Any sort of heavy lifting where the ground gets rough.
- Working overhead in areas where the ground does not.
- Accommodate an elec. Unit.
- Dual fuel (gas / propane power) along with 4-wheel.
- Drive allows go anywhere capability.
- 2000lbs payload capacity ensures the heaviest jobs will get done.
- Flashing amber light and alarm to alert others around while unit is in use.
- Safety belt lanyard attachment ring.
- 110v power on working platform.
- Slide out platform extension for easy reach.
- Fully grounded steel construction for added safety and durability.
- Four wheel drive makes sure you don't get stuck anywhere.
- Rough terrain scissors should only be used on compacted areas.
- Manual lift release in case of power loss.
- Propane power allows for indoor use without toxic fumes endangering people's health.
- Watch while travelling up for low ceilings - serious head injury could occur - always wear a hard hat.
- Safety belt lanyard attachment ring.
- 110v power on working platform.
- Slide out platform extension for easy reach.
- Fully grounded steel construction for added safety and durability.
- Four wheel drive makes sure you don't get stuck anywhere.
- Rough terrain scissors should only be used on compacted areas.
- Manual lift release in case of power loss.
- Propane power allows for indoor use without toxic fumes endangering people's health.
- Watch while travelling up for low ceilings - serious head injury could occur - always wear a hard hat.
- Overall scissor lift dimensions, stowed (lxwxh): 176"x92:x123".
- Will fit through bay door.
- Total height of sissor lift, at your feet, 50'.
- Platform dimension (lxw): 168"x74".
- Platform capacity is 2000 lbs
- Total weight of lift is 13,400 lbs.
- Restricted to working on main floors.
- Able to travel down ramps up to 25% grade.
- Total speed is 3mph for safety at elevated heights.
- Will fit through bay door.
- Total height of sissor lift, at your feet, 50'.
- Platform dimension (lxw): 168"x74".
- Platform capacity is 2000 lbs
- Total weight of lift is 13,400 lbs.
- Restricted to working on main floors.
- Able to travel down ramps up to 25% grade.
- Total speed is 3mph for safety at elevated heights.
- Prior to starting lift, select type of fuel desired (gas or propane) at the motor at front of lift.
- Ensure that the red emergency stop button both at the base and control box have been enabled.
- Select key switch to either drive or lift to enable the lift.
- Push button starting system makes ease of starting. Push the choke button in and then hit the start button.
- After motor starts, let go of the choke.
- Select low speed or high speed when lift is stowed, low speed is automatic when lift is raised.
- If the ground is rough, select hi-torque which engages the 4X4 system.
- Pull up the safety lever on the joystick up and push the joystick in the desired direction of travel.
- The turning controls are located on the top of the joystick.
- To go up in the lift, simply stop the lift, enable the lift by using the "enable" button and turn the dial in the desired.
- Direction, whether it be up or down.
- The lift can move on a gr - For full operating instructions, please refer to the operators manual.
- Ensure that the red emergency stop button both at the base and control box have been enabled.
- Select key switch to either drive or lift to enable the lift.
- Push button starting system makes ease of starting. Push the choke button in and then hit the start button.
- After motor starts, let go of the choke.
- Select low speed or high speed when lift is stowed, low speed is automatic when lift is raised.
- If the ground is rough, select hi-torque which engages the 4X4 system.
- Pull up the safety lever on the joystick up and push the joystick in the desired direction of travel.
- The turning controls are located on the top of the joystick.
- To go up in the lift, simply stop the lift, enable the lift by using the "enable" button and turn the dial in the desired.
- Direction, whether it be up or down.
- The lift can move on a gr - For full operating instructions, please refer to the operators manual.
- Make sure that the gas and the propane are fueled up and that one or the other is selected.
- If not selected, there is a neutral position - no power.
- Use choke carefully as not to flood the motor.
- Double check to make sure that the red emergency stop buttons are disabled (pulled out).
- If motor runs and nothing is happening, make sure the enable switch is used.
- If lift functions are in-operable and the alarm is going off, the unit is on a grade where the lift.
- If not selected, there is a neutral position - no power.
- Use choke carefully as not to flood the motor.
- Double check to make sure that the red emergency stop buttons are disabled (pulled out).
- If motor runs and nothing is happening, make sure the enable switch is used.
- If lift functions are in-operable and the alarm is going off, the unit is on a grade where the lift.
