- Used to compact cohesive, granular and mixed soils in confined areas.
- Do not refuel while the engine is running or when it is hot.
- A hole or depression in the compaction area should be blocked off.
- Do not operate on uneven surfaces or when the machine is on an angle.
- Be sure the throttle is in the idle position before turning the machine on.
- Always wear the proper attire while operating this machine (i.e. safety shoes, gloves, hearing protection).
- Always use in a well ventilated area.
- A hole or depression in the compaction area should be blocked off.
- Do not operate on uneven surfaces or when the machine is on an angle.
- Be sure the throttle is in the idle position before turning the machine on.
- Always wear the proper attire while operating this machine (i.e. safety shoes, gloves, hearing protection).
- Always use in a well ventilated area.
- Shoe Width: 10" (250 mm).
- Engine Speed: 100-4400rpm.
- Sound Level: 91db.
- Height: 38.25 " (956 mm).
- Fuel: two cycle gasoline ( 50:1).
- Engine Speed: 100-4400rpm.
- Sound Level: 91db.
- Height: 38.25 " (956 mm).
- Fuel: two cycle gasoline ( 50:1).
- Open fuel valve.
- Close choke on carburetor.
- Open throttle no more than 1/4.
- Pull starter rope until engine starts.
- Open choke on carburetor.
- When running the jumping jack guide it with the handle.
- Allow the machine to pull itself forward.
- It must hit the ground flat.
- Place throttle in the idle position.
- Close the fuel valve to shut off engine.
- For full operating instructions, please refer to the operators manual.
- Close choke on carburetor.
- Open throttle no more than 1/4.
- Pull starter rope until engine starts.
- Open choke on carburetor.
- When running the jumping jack guide it with the handle.
- Allow the machine to pull itself forward.
- It must hit the ground flat.
- Place throttle in the idle position.
- Close the fuel valve to shut off engine.
- For full operating instructions, please refer to the operators manual.
The tool is not starting
- The fuel tank is empty.
- The spark plug has been fouled.
- The fuel valve is closed.
- Let the tool sit for 10 minutes to ensure it is not flooded with gas.
- Choke has not been used.
- The fuel tank is empty.
- The spark plug has been fouled.
- The fuel valve is closed.
- Let the tool sit for 10 minutes to ensure it is not flooded with gas.
- Choke has not been used.
