- Used to circulate air in plants, factories and warehouses.
- Distributes heat and maintains air exchanges on construction sites.
- Distributes heat and maintains air exchanges on construction sites.
- Allows operate with guards in place.
- Position fan on a solid base.
- Do not hang fan.
- Do not block or clutter aisles.
- Position fan on a solid base.
- Do not hang fan.
- Do not block or clutter aisles.
- 5000 cfm.
- Single speed, 1725 RPM.
- Draws 15 amps@110 volt.
- 20" diameter.
- 16" wide x 22.5" high.
- Weight 67 LB.
- Single speed, 1725 RPM.
- Draws 15 amps@110 volt.
- 20" diameter.
- 16" wide x 22.5" high.
- Weight 67 LB.
- Position fan away from traffic areas.
- Aim flow in desired direction.
- Use an extension cord - 12 gauge, maximum 50'.
- Plug in to receptacle.
- Fan automatically turns on>
- For full operating instructions, please refer to the operators manual.
- Aim flow in desired direction.
- Use an extension cord - 12 gauge, maximum 50'.
- Plug in to receptacle.
- Fan automatically turns on>
- For full operating instructions, please refer to the operators manual.
- Check the circuit to make sure it is live.
- Only use 12 gauge or heavier cords, maximum 50'.
- Only use 12 gauge or heavier cords, maximum 50'.
