- Provides local area ventilation.
- Effectively cools factories, offices, stores and warehouses.
- Extract fumes, dusts or move air to where it is required.
- Effectively cools factories, offices, stores and warehouses.
- Extract fumes, dusts or move air to where it is required.
- Allows operate with guard in place.
- Position fan on a solid base.
- Do not hang fan.
- Do not block or clutter aisles.
- Extended use will cause motor to become hot to the touch.
- Position fan on a solid base.
- Do not hang fan.
- Do not block or clutter aisles.
- Extended use will cause motor to become hot to the touch.
- 2 speed motor, High 1120 RPM, Low 915 RPM.
- 2.1 amp High, 1.5 amp Low @ 110 Volt.
- Quiet operation.
- Gentle air flow.
- Motor tilts to direct air up or down.
- 2.1 amp High, 1.5 amp Low @ 110 Volt.
- Quiet operation.
- Gentle air flow.
- Motor tilts to direct air up or down.
- Position fan away from traffic areas.
- Aim flow in desired direction.
- Plug in to receptacle.
- Ensure cord does not interfere.
- Select speed.
- For full operating instructions, please refer to the operators manual.
- Aim flow in desired direction.
- Plug in to receptacle.
- Ensure cord does not interfere.
- Select speed.
- For full operating instructions, please refer to the operators manual.
- Check the circuit to make sure it is live.
- Ensure the switch on motor is set at high or low setting.
- Ensure the switch on motor is set at high or low setting.
