Welder, 160 Amp, Portable Gas

- An excellent compact welder for outdoor use.
- Easily transportable and well suited for most welding applications undertaken by trades, homeowners, etc.

- Read the owners manual prior to use.
- Keep the electrode and work cables together, and never drape over your body.
- Never touch the electrode or work as electric shock may result.
- Always keep combustibles and vapors away from welder.
- Sparks can travel a fair distance. Ensure workspace is free of hazards.
- Always keep combustibles and vapors away from welder.
- Have a fire extinguisher handy at all times.
- Allows wear protective clothing, gloves, etc
- Always wear the proper shield. Arc rays can burn.
- Provide adequate ventilation as fumes can be dangerous.
- Gas welders should only be used outdoors. Carbon monoxide is poisonous.

- Adjustable amp range from 40 to 160 Amps.
- Welding current 160 Amps @ 35% duty cycle.
- DC power.
- 4000Watt AC Generator.
- 11 HP gasoline engine.
- Low noise level.
- 25' ground.
- 25' lead.
- Weight 160 LB.

- Familiarize yourself with manufacturer's safety requirements and operating instructions prior to use.
- Ensure the metal to be joined is clean and free of debris.
- Connect the ground to the work ensuring a very good connection.
- Install an electrode in the holder.
- Arrange your work area for safety and put on protective equipment.
- Start the gasoline engine.
- Touch the electrode to the work and then pull back slightly. Keep an even gap between the electrode and work to maintain the arc.
- For full operating instructions, please refer to the operators manual.

Cannot run an even bead.
- Check amperage settings on welder.
- Check types of rods being used for situation.
- Ensure rods are from a sealed package or rod oven.
- Check for proper ground.