- Used for removal of water that is free of debris in such places as ponds, swimming pools and construction sites.
- Do not run the pump without water.
- Make sure the power source confirms to the requirements of the pump.
- Should not be used to pump water which contains chemicals.
- Do not pump flammable materials.
- Make sure the power source confirms to the requirements of the pump.
- Should not be used to pump water which contains chemicals.
- Do not pump flammable materials.
- 2/3 Hp Motor output.
- Single phase motor.
- 39.5 ft total head (maximum).
- 63.5 gallon/minute.
- 6.1 Amps.
- Weight - 30 lbs.
- Length of cable - 32 ft.
- Dimensions - width 7 3/8" x height 12".
- Single phase motor.
- 39.5 ft total head (maximum).
- 63.5 gallon/minute.
- 6.1 Amps.
- Weight - 30 lbs.
- Length of cable - 32 ft.
- Dimensions - width 7 3/8" x height 12".
- Attach discharge hose to pump.
- Place the pump in the deepest area of water.
- Place discharge hose in an area where drainage of water is permissible.
- Plug the pump in and let it run until all the water has been pumped from the respective place.
- Once all the water has been pumped unplug the pump and detach the hose.
- For full operating instructions, please refer to the operators manual.
- Place the pump in the deepest area of water.
- Place discharge hose in an area where drainage of water is permissible.
- Plug the pump in and let it run until all the water has been pumped from the respective place.
- Once all the water has been pumped unplug the pump and detach the hose.
- For full operating instructions, please refer to the operators manual.
Pump operates but does not pump water.
- Something is obstructing the flow of water with the pump.
- Ensure filter screen on the bottom of the pump is not covered with debris.
- Ensure hose in not kinked.
- Ensure maximum electrical cord used does not exceed 100' , and should be at least 12 gauge cord.
- Something is obstructing the flow of water with the pump.
- Ensure filter screen on the bottom of the pump is not covered with debris.
- Ensure hose in not kinked.
- Ensure maximum electrical cord used does not exceed 100' , and should be at least 12 gauge cord.
