- Used for fast removal of water which is free of debris in places such as wells and pools and construction sites.
- Be sure to turn the engine off when refueling.
- Do not run the pump without water.
- Should not be used to pump water which contains chemicals.
- Do not pump flammable materials.
- Do not run the pump without water.
- Should not be used to pump water which contains chemicals.
- Do not pump flammable materials.
- Maximum capacity of 15,840 (US gallons per minute).
- Honda 5.5 Hp.
- Run time/tank (Hr) - 3.3
- Maximum discharge head (ft)- 105.
- Weight 64 lbs.
- Dimensions (L x W x H in.) - 20 1/2 x 16 1/2 x 18 7/8.
- Honda 5.5 Hp.
- Run time/tank (Hr) - 3.3
- Maximum discharge head (ft)- 105.
- Weight 64 lbs.
- Dimensions (L x W x H in.) - 20 1/2 x 16 1/2 x 18 7/8.
- Place the intake and discharge hoses in their respective places.
- Put the on/off switch in the on position.
- Turn the choke and the gas line on.
- Prime pump housing as well as intake hose.
- Pull the cord until the engine rolls over.
- Turn the choke off.
- Pull the cord until the engine begins to run.
- Let the pump run until the water has been completely displaced.
- For full operating instructions, please refer to the operators manual.
- Put the on/off switch in the on position.
- Turn the choke and the gas line on.
- Prime pump housing as well as intake hose.
- Pull the cord until the engine rolls over.
- Turn the choke off.
- Pull the cord until the engine begins to run.
- Let the pump run until the water has been completely displaced.
- For full operating instructions, please refer to the operators manual.
The pump is running, but it is not pumping the water out.
- Ensure the hose / pump has not lost it's prime.
- Be sure the hose has been placed deep enough in the water.
- Ensure the hose is not kinked.
- Ensure the motor is running and there is still gas and oil in the machine.
- Ensure intake hose strainer is not plugged with debris.
- Ensure all hoses have rubber washer in place.
- Ensure the hose / pump has not lost it's prime.
- Be sure the hose has been placed deep enough in the water.
- Ensure the hose is not kinked.
- Ensure the motor is running and there is still gas and oil in the machine.
- Ensure intake hose strainer is not plugged with debris.
- Ensure all hoses have rubber washer in place.
