- Used to remove water which is free of debris in places such as roof tops, swimming pool covers and flooded basements.
- Do not handle pump with wet hands.
- Do not pump any flammable material.
- Keep children a safe distance from working area.
- Make sure the power source conforms to the requirements of the pump.
- Do not pump any flammable material.
- Keep children a safe distance from working area.
- Make sure the power source conforms to the requirements of the pump.
- 110 volts.
- 25' of electrical cord.
- Pumps approximately 1000 gallons per hour.
- Pumps water down to 1/8" from roof or floor.
- Unit is totally submersible to electrical plug.
- 25' of electrical cord.
- Pumps approximately 1000 gallons per hour.
- Pumps water down to 1/8" from roof or floor.
- Unit is totally submersible to electrical plug.
- Attach your 3/4" discharge hose to pump.
- Place pump into area which has to be drained.
- Plug the electrical cord into power source.
- Pump will automatically turn on, wait until water is completely displaced.
- For full operating instructions, please refer to the operators manual.
- Place pump into area which has to be drained.
- Plug the electrical cord into power source.
- Pump will automatically turn on, wait until water is completely displaced.
- For full operating instructions, please refer to the operators manual.
Pump will not work.
- Check electrical supply.
- Ensure filter screen on the bottom of the pump is not plugged with debris.
- Ensure that the pump is sitting flat on surface that is being pumped.
- Ensure maximum electrical cord used does not exceed 100' , and should be at least 12 gauge cord.
- Check electrical supply.
- Ensure filter screen on the bottom of the pump is not plugged with debris.
- Ensure that the pump is sitting flat on surface that is being pumped.
- Ensure maximum electrical cord used does not exceed 100' , and should be at least 12 gauge cord.
