- Commonly used to cup pipe and metal in awkward and hard to reach places.
- Be sure the cord is not cut or worn.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Capacity 3 1/2" round stock, 3 1/2 x 4 1/2" rectangular stock.
- Put a blade on by flipping the lever on the top of the saw and putting the blade over the two round metal circle and flipping the switch back into position.
- Plug the tool in.
- Place the blade of the saw flat on the material being cut.
- Hold both handles of the saw firmly.
- Pull the trigger of the saw and begin to cut the material by pushing the saw toward the material slowly.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
- Plug the tool in.
- Place the blade of the saw flat on the material being cut.
- Hold both handles of the saw firmly.
- Pull the trigger of the saw and begin to cut the material by pushing the saw toward the material slowly.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
Saw is not working.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
The circles on the bottom of the saw are turning but the blade is not.
- Check the lever on the top of the saw and make sure it is locked into place.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
- Check the lever on the top of the saw and make sure it is locked into place.
