- Commonly used to cut studs and large pieces of plywood.
- Be sure the cord is not cut or worn.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Always be sure the tool is equipped with all the safety guards.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Always be sure the tool is equipped with all the safety guards.
- Uses 15 amps.
- Uses 115 volts.
- Cuts to a depth of 2".
- Uses 115 volts.
- Cuts to a depth of 2".
- Plug the tool in.
- Place the front of the saw flat on the material being cut.
- Pull the trigger of the saw and begin to cut the material by pushing the saw along the material slowly.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
- Place the front of the saw flat on the material being cut.
- Pull the trigger of the saw and begin to cut the material by pushing the saw along the material slowly.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
Saw is not working.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
Saw is cutting, but burning the wood.
- Check the blade for sharpness.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
Saw is cutting, but burning the wood.
- Check the blade for sharpness.
