- Commonly used to cut steel.
- Be sure the cord is not cut or worn.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Always be sure the tool is equipped with all the safety guards.
- Always be aware of hot sparks.
- Always wear safety glasses.
- Never wear loose clothing while operating the tool.
- Always be sure the tool is equipped with all the safety guards.
- Always be aware of hot sparks.
- Uses 110 volts.
- Uses 15 amps.
- Uses 15 amps.
- Place the steel on the platform of the saw and lock it in.
- Plug the tool in.
- Pull the trigger of the saw and begin to lower the blade through the material until the material has been cut in half.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
- Plug the tool in.
- Pull the trigger of the saw and begin to lower the blade through the material until the material has been cut in half.
- Once you are done take your hand off the trigger and unplug the tool.
- For full operating instructions, please refer to the operators manual.
Saw is not working.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
- Check the cord for any damage and be sure it is plugged in.
- Make sure the blade has been installed properly.
