- Used to lift vinyl tile off of a concrete floor.
- Used to lift carpet off of concrete or wooden floor.
- Used to lift almost anything which is glued or stuck to a floor, you must use the right blade.
- Used to lift carpet off of concrete or wooden floor.
- Used to lift almost anything which is glued or stuck to a floor, you must use the right blade.
- Always wear steel toe safety boots, and gloves.
- Uses 110 volts of electricity.
- 50 lbs weight on the front of the stripper.
- Comes with wood or vinyl tile blades
- 50 lbs weight on the front of the stripper.
- Comes with wood or vinyl tile blades
- Assess what blade is needed for the particular job.
- Plug the tool in.
- Adjust height of the handle to a comfortable position.
- Turn the tool on.
- Push the tile stripper into the material being taken off the floor.
- Push the tile stripper forward until you are done stripping the material off the floor.
- Repeat the process until the job has been completed.
- For full operating instructions, please refer to the operators manual.
- Plug the tool in.
- Adjust height of the handle to a comfortable position.
- Turn the tool on.
- Push the tile stripper into the material being taken off the floor.
- Push the tile stripper forward until you are done stripping the material off the floor.
- Repeat the process until the job has been completed.
- For full operating instructions, please refer to the operators manual.
The tool is not cutting into the material that you want to remove
- Be sure the blade is sharp, and not damaged.
- Ensure the blade is mounted properly.
- Be sure the blade is sharp, and not damaged.
- Ensure the blade is mounted properly.
